Stainless Steel Field Assembly Threaded Cable Tensioner/Stud Fastener, Through Post Fitting Used to Tension 3/16" Wire Rope on Cable Rail Deck

For #1-2, you will need the following for 1/8" or 3/16" Cable: (1ea) Field Tensioner (1ea) Field Terminal (2ea) Acorn/Hex/Washer for (Metal or Wood Post) For #3-4, you will need the following for 1/8" or 3/16" Cable: (1ea) Field Tensioner (1ea) Field Terminal (2ea) Cable Quick Nut/Cover For all Assembly lengths >50' (70' max) and/or runs from 0-70' with more than (1) 90 degree corner, use (2) Field Swaged Tensioners (instead of (1) Field Swaged Threaded Terminal + (1) Field Swaged Threaded Tensioner), to allow cable tightening at both ends of your run. For#5-6, you will need the following for 1/8" or 3/16" Cable: (2ea) Field Tensioner (2ea) Acorn/Hex/Washer (Metal or Wood Post) For#7-8, you will need the following for 1/8" or 3/16" Cable: (2ea) Field Tensioner (2ea) Cable Quick Nut/Cover Tools Required for this Assembly includes the following: (1) Cable Crimper with our specialized Hex Die for 1/8" or 3/16" Cable (not included with this order) (1) Cable Cutter for 1/8" or 3/16" Cable (not included with this order) Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results. We recommend applying Citrisurf 77 Plus to all exposed stainless steel components at the time of installation. In addition, apply Boeshield T9 if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page.

• 316 Marine Grade Quality - Excellent corrosion resistance!
• Fits and tensions 3/16" wire rope cable
• Can be swaged on with our Hydraulic Pump Cable Crimper Hand Tool with Valve for 3/16 Inch Wire Cable
• Through Post Fitting, can be used with our Cable Quick Nut Flat Cap or Acorn, Hex and Washer
• Works on both Metal and Wood Posts